About Us Products Model No. Parts Warranty Manuals Contact Us
home >> combo pellet/plate heater  
Alliance 1-800-522-3973
  
Combination Pellet and Plate Heater
  Combination Pellet and Plate Heater Specification Sheet

  Operations Manual Operations Manual

If you do not have Acrobat Reader then click here:
   

Combination Pellet and Plate Heater

Specifications

  • Stainless steel is nickel-bearing, 200 series minimum. This material is NSF recognized for corrosion resistance.
     
  • The DALPH1022 has two heated compartments, one for plates and one for pellets, which are independently controlled and have an automatic hi-temp shut-off.
      
  • Accommodates dishes and pellets ranging from 7" to 10 1/4".
      
  • Electrical: 208/220 VAC, 60 Hz, single phase.
    Eight foot grounded 20 amp power cord supplied.
     
  • NEMA 6-20P plug.
      
  • Construction: The outer unit is constructed of 18 gauge stainless steel. Inner walls constructed of .063 high strength aluminum. All sides and lids of unit are insulated with fiberglass insulation.
      
  • Lids: Unique hat-channel design requires no gaskets.
      
  • Heating System: Thermostatically controlled-forced air heating system with 3200 watt element.
      
  • Self-Leveling Dispenser: Individual, removable, self-adjusting and all stainless steel construction. Self-lubricating bearings ride over vertical guide rods. Available stacking height is 27 1/4".
      
  • Casters: Unit is mounted on four 5" diameter swivel casters with non-marking cushion tread, two with swivel-lock and wheel with brakes.

             

Dimensions

Model

Overall Size
 
Casters
Shipping Weight
Case Cube
Electrical Specifications
W
D
H
Type
Dia.
lbs.
Cu. ft.
Watt
Amp
Volt

DALPH1022
  
36"
24"
42 3/4"
4 swivel,
2 w/brake
5"
285
32.7
3200
17.2
208/220
60 Hz

Drawings

Combination Pellet and Plate Heater

 

© 2011 Alliance Products, LLC
820 Esther Lane | Murfreesboro, TN 37129
1.800.522.3973 toll free
615.895.5333 phone
615.895.5334 fax

Terms & Conditions